Warren G
Member
Registered: 14th May 06
Location: Kent
User status: Offline
|
what do they do? just add a bit more petrol and raise the rev limit
how are they fitted, are they a chip that is added on to the standard ecu, or do they supply a new ecu?
and anyones experance's with em......
|
eel
Member
Registered: 19th Oct 06
User status: Offline
|
no u dont need a new ecu it will give u more bhp
|
Robin
Premium Member
Registered: 7th Jan 04
Location: Northants Drives: Clio 182 Cup
User status: Offline
|
they fit it to the original ecu.
they're a bit crap though, as they are just a base map for the engine, so any mods you added, won't be taken into account.
unichip is better, as you can have it mapped for YOUR car.
|
L30 SCT
Member
Registered: 27th Nov 05
Location: aberdeen
User status: Offline
|
unichip is better but will cost you between £495 to £595 depending on what type of engine you have and what you want out of it.
the superchip is 280 i think and just raises the rev limit.
depends on what mods your doing and how much money you have.
|
Warren G
Member
Registered: 14th May 06
Location: Kent
User status: Offline
|
dont want to spend any money, just woundered if i bought a superchipped ecu
un soildered the chip and fitted it to my x14xe
sounds doggy i know! but has anyone take a superchipped ecu apart?
and what does it raise the limit to? (1.6 16v one)
|
topshot_2k
Banned
Registered: 1st Dec 03
Location: Northampton Drives: Pug GTi-6
User status: Offline
|
superchip will make over fuel. they are crap. get a dastek unichip
|
L30 SCT
Member
Registered: 27th Nov 05
Location: aberdeen
User status: Offline
|
7500 i think. i have got mine fitted and havent hit the limiter yet. am to scared to take it over 7000
|
Robin
Premium Member
Registered: 7th Jan 04
Location: Northants Drives: Clio 182 Cup
User status: Offline
|
Leo, yours will be fine over 7krpm, what rod bolts have you got?
|
L30 SCT
Member
Registered: 27th Nov 05
Location: aberdeen
User status: Offline
|
arp
|
Warren G
Member
Registered: 14th May 06
Location: Kent
User status: Offline
|
whats an other way to raise the limit (cheaply)
will be a x14xe with throttle bodies, so want to rev to 7200rpm
http://cgi.ebay.co.uk/corsa-16v-ecu-superchipped-remap-Genuine-not-fake_W0QQitemZ300052473214QQihZ020QQcategoryZ72205QQrdZ1QQcmdZViewItem
can you get the standard map changed?
and are all unichips the same, with just a different map progremmed on?
http://cgi.ebay.co.uk/Dastek-Unichip-c20xe-nova-astra-cavalier_W0QQitemZ280052685241QQihZ018QQcategoryZ32094QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
|
shane2corsa
Member
Registered: 4th Sep 05
Location: Nettleham, Lincolnshire
User status: Offline
|
i understand you can get the standard map changed yes, i think Jamsport do it
|
Warren G
Member
Registered: 14th May 06
Location: Kent
User status: Offline
|
do you no the cost?
|
L30 SCT
Member
Registered: 27th Nov 05
Location: aberdeen
User status: Offline
|
i have seen 3 different shaped unichips but i dont no if they can all be fitted to any car.
|
Warren G
Member
Registered: 14th May 06
Location: Kent
User status: Offline
|
does anyone no if you can just raise the standardrev limit then?
don't have £300 for rr tuning, just want to raise the limit
i no its not the proper way, but the mods will only be on for a short while (will be putting on the 1.6 (4 branch decat system)
so no point having it mapped really, and will probley sell em after 6months once i get bored
im be feeling a c20ne with a supercharger! (once the 1.6 is finished!)
|
L30 SCT
Member
Registered: 27th Nov 05
Location: aberdeen
User status: Offline
|
raising the rev limit for even a short time without sbd rollers and arp rod bolts can fuck your engine and with out any serious mods your not going to need your limit raised
|
Warren G
Member
Registered: 14th May 06
Location: Kent
User status: Offline
|
cam belt was done less that 5k ago (cam belt kit)
dbilas throttle bodies is gonna be the mod
|
L30 SCT
Member
Registered: 27th Nov 05
Location: aberdeen
User status: Offline
|
its the rollers that break up due to them being made from plastic. the sbd ones are made from metal. you could always wait till a second hand chip goes up for sale on here.
[Edited on 25-11-2006 by L30 SCT]
|
L30 SCT
Member
Registered: 27th Nov 05
Location: aberdeen
User status: Offline
|
there you go mate, http://cgi.ebay.co.uk/corsa-16v-ecu-superchipped-remap-Genuine-not-fake_W0QQitemZ300052473214QQihZ020QQcategoryZ72205QQrdZ1QQcmdZViewItem
|
Warren G
Member
Registered: 14th May 06
Location: Kent
User status: Offline
|
but is useless unless i have a matching transponer key!
but can i remove the chip(if they fit a chip) - or do they just program the ecu?
|
L30 SCT
Member
Registered: 27th Nov 05
Location: aberdeen
User status: Offline
|
i suppose you could take it to a garage and get them to take it out and solder it in to your ecu.
|
L30 SCT
Member
Registered: 27th Nov 05
Location: aberdeen
User status: Offline
|
infact i think it just pushes in, ask dave A
|
Warren G
Member
Registered: 14th May 06
Location: Kent
User status: Offline
|
does anyone no before i ask dave again?
|
Jas
Member
Registered: 13th Oct 04
Location: Mid Wales
User status: Offline
|
quote: Originally posted by L30 SCT
there you go mate, http://cgi.ebay.co.uk/corsa-16v-ecu-superchipped-remap-Genuine-not-fake_W0QQitemZ300052473214QQihZ020QQcategoryZ72205QQrdZ1QQcmdZViewItem
i suppose you could take it to a garage and get them to take it out and solder it in to your ecu.
|
Rob_Lee
Banned
Registered: 9th Dec 05
Location: Folkestone Drives: Nova 1.6 16v
User status: Offline
|
if the one on there is designed for a X16xe wouldnt it be different chip to a c16xe/x14xe?
Superchips site says different numbers for each of the engines????
Dave A will prob know
|
Jules
Member
Registered: 26th Nov 04
Location: Ipswich, Suffolk Status: Happy
User status: Offline
|
Never had any problems with my Superchip (over fuelling etc etc), not really seen any gains neither but I only have a drilled airbox and Mongoose backbox so wasn't expecting any - if anything it does seem to run a bit smoother through the revs than before but I run it on Optimax which might help
|