csweatherston
Member
Registered: 16th Jan 06
Location: Devon
User status: Offline
|
To fit my lowered tiebar spacers, ive heared smallblock vaux headbolts are needed...
ive probly got millions in the scrap pile outback, just wondering what ones to look out for.
Is it the ones with e10/12 head, 3" unthreaded neck, and m12x1.25 thread?
can i use them as they are, or would i need to shorten them if using a 30mm spacer?.
cheers
|
DAZ1985
Member
Registered: 3rd Sep 06
Location: Scholar Green, Cheshire
User status: Offline
|
may need to be shorted if the hole is near the rad
x16xe head bolts i used on mine, no pics though sorry
think 1.25 pitch is abit big, seems alot finer than that
[Edited on 28-04-2008 by DAZ1985]
|
csweatherston
Member
Registered: 16th Jan 06
Location: Devon
User status: Offline
|
diesle bolts, with 10mm allen head:
14/16xe bolts with torx head:
just wanted to get it sorted before i disable my car on a ramp lol
|
luke85
Member
Registered: 26th Nov 07
Location: Chesterfield
User status: Offline
|
I got a set from a cavalier witha normal bolt head on, you should cut one or 2 down I think because they will hit the radiator
|
DAZ1985
Member
Registered: 3rd Sep 06
Location: Scholar Green, Cheshire
User status: Offline
|
I've got 45mm spacers and i cut one bolt dowm cause my rad is very close on one side
iirc the others stick out 10-15mm
|
