qasimcorsamad
Member
Registered: 3rd May 09
Location: Worthing
User status: Offline
|
is it possible to smoke valeo headlights for a corsa b?
|
sri_baby
Member
Registered: 17th Feb 08
User status: Offline
|
its been done but its a pain in the arse thats if ya lookin 4 the depo look i went throw about 3 headlights and that woz only on one side but its worth it once its done good luck hope this helps
|
Gareth F
Member
Registered: 16th Jan 08
Location: Location Location
User status: Offline
|
I done it first time, stabbed myself twice and shoved a screwdriver into my nutsack 
Does look lood though 
|
qasimcorsamad
Member
Registered: 3rd May 09
Location: Worthing
User status: Offline
|
gareth how did u do it?
did u use the spray or did u u use the smoking paper.
and can u tell me how u done it please?
cheers
|
sri_baby
Member
Registered: 17th Feb 08
User status: Offline
|
in ya nutsack lol not the best place t b stabbin urself i tryed puttin the light in a oven 2 heat the glue up and i used just normal spray paint
|
Gareth F
Member
Registered: 16th Jan 08
Location: Location Location
User status: Offline
|
I used a hair dryer to heat them up till they were proper hot then slowly pushed a screw driver through the seal then used a razor sharp blade to cut through the seal next to where i prized it apart. Just keep heating them up and moving your way along the seal pushing the screwdriver in and cutting with the blade. Dont force the screw driver in too hard as the glass will crack, might be worth wearing some goggles or something just incase mate.
|
qasimcorsamad
Member
Registered: 3rd May 09
Location: Worthing
User status: Offline
|
right and how did u join it back together?
|
Gareth F
Member
Registered: 16th Jan 08
Location: Location Location
User status: Offline
|
Black windscreen sealant from halfords, press them together and tape them up, after they are left to dry just go around the sealed bit with more sealant and your finger to make sure theres no gaps else they will mist up with water!
|
