dibsta
Member
Registered: 3rd Sep 11
Location: Sheffield UK
User status: Offline
|
Hi All
Here is my situation today ive bought 2 door from scrappy
the doors ive bought have electric windows and electric mirrors
My previous doors had electric mirrors but manual windows,how hard will be to get electric windows working.
Cheers Dave
|
Dan Seabo
Member
Registered: 26th Dec 10
User status: Offline
|
you need 2 motors/regulators, switches, top spec door loom. if you have high spec car loom then just get two sport door looms or cdx i think have them and plug them straight in and replace your old ones. then just swap the regulators around and plug and play then. You will also want some sport door cards to cover up the manual holes
|
dibsta
Member
Registered: 3rd Sep 11
Location: Sheffield UK
User status: Offline
|
Hi mate
The doors ive bought have everything inside complete door
so i need to know how to power them
Cheers Dave
|
Dan Seabo
Member
Registered: 26th Dec 10
User status: Offline
|
if the doors are the same colour just swap them over and plug the multi plug in 
if not you need to take the door apart, start by taking door card and pocket off. once you have exposed the weather shield just rip it of of your not using the doors, then unplug everything and push the multiplug out, then just bring all the loom out. Then you need to drill out the rivets that hold the regulators on, once thats of you have everything you need. then just repeat the process on your door you want them in, starting by re riveting the regulator on then wire everything up.
has that explained it ?
|
Dan Seabo
Member
Registered: 26th Dec 10
User status: Offline
|
you will also need a 30 amp in no. 28 i think it was
|
dibsta
Member
Registered: 3rd Sep 11
Location: Sheffield UK
User status: Offline
|
Just a Update put in 30a fuse in 28 works a treat
Thanks for help and advice
|
