islandofshame
Member
Registered: 24th Sep 06
Location: Airdrie, North Lanarkshire
User status: Offline
|
hey,
recently bought maself a compressor n spray gun for doin odd bit n bobs...
never used one before so basically just gona teach maself but was wondering what the deal is with thinners n hardeners? are they both required? and in what quantities?
cheers
- islandofshame
|
islandofshame
Member
Registered: 24th Sep 06
Location: Airdrie, North Lanarkshire
User status: Offline
|
anyone?
|
Superlite Ltd.
Member
Registered: 9th Jan 07
User status: Offline
|
First off, what type of paint are you wanting to use? Celly, 2k etc?
http://www.diy-compressors.com/spraying-basics.htm
I sell paint/thinners to alot of bodyshops around here. I suggest finding a pro and learning from them. There is alot to learn
|
islandofshame
Member
Registered: 24th Sep 06
Location: Airdrie, North Lanarkshire
User status: Offline
|
by the looks of it i'd be using a cellulose paint - does this means that it doesn't require hardener?
|
CorsAsh
Member
Registered: 19th Apr 02
Location: Munich
User status: Offline
|
With Celli you mix it as thin as possible - at least 50% thinners to 50% paint. I've probably mixed to 70/30 at times.
You shouldn't need hardener, and unless its a metallic paint, you shouldn't need lacquer either - as you can end up with some shitty things happening.
|
austen
Member
Registered: 9th Jun 07
Location: midlands
User status: Offline
|
cellulose paint is air drying even metallic cellulose is air drying,
most paint is referred to as either 1k (air drying) or 2k(needs hardener) then it is down to the specific paint in question as to mixing ratios 2k is usually 2:1:10% being hardener and thinners respectively.
hope this helps, but I'm sure if you search Google theres so many ppl asked this before
|
sigibbons
Member
Registered: 10th Feb 04
User status: Offline
|
Id go for 2k personally you will get a nice finish and it lasts. obviously its harmfull to breath in but invest ina good mask and plently of ventalation and you should be fine.
|
CorsAsh
Member
Registered: 19th Apr 02
Location: Munich
User status: Offline
|
I've never wanted to use 2k without a proper booth, don't think it's fair to your family or neighbours to be pumping cyanide into the atmosphere.
|
V-Man
Member
Registered: 7th Feb 05
Location: Iwade, Sittingbourne
User status: Offline
|
i mix up.. 1k - 60% thinner 40% paint
|
Superlite Ltd.
Member
Registered: 9th Jan 07
User status: Offline
|
quote: Originally posted by sigibbons
Id go for 2k personally you will get a nice finish and it lasts. obviously its harmfull to breath in but invest ina good mask and plently of ventalation and you should be fine.
I sell more 2k than anything else, but for a DIY job mabe cellulose based is better?
|
Will_Sport
Member
Registered: 28th Jun 04
Location: Notts
User status: Offline
|
start off 50/50 with 1k, then go to like 60/40 then to 70/30 will give a smooth finish if done proper.
and lots of cutting paste etc to finish with.
|
islandofshame
Member
Registered: 24th Sep 06
Location: Airdrie, North Lanarkshire
User status: Offline
|
nice one guys, thanks a lot
|