Markus
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 19th Nov 07
Location: Beverley - East Yorkshire
User status: Offline
|
i am in need of desperate help, i have two corsas one 94 year one 95 year
i have put the 94 engine in the 95 one as the engine was blown in it
now the engine wont start, the 95 one has an immobiliser so i have disconnected it and are using the ecu from the 94 one still wont start,
i have 12v coming to the king lead on ignition but when i crank the engine the volts drop
there is no spark at the plugs but the fuel is getting through
i have taken the crank sensor plug off and there is 12v coming out
i tried the wire in the centre of the plug to earth as explained in an archive of this forum and the king lead sparks
i have tried towing the car off but nothing
any ideas would be appreciated,
cant afford to take it to garage as on the old dole and parents need it off their drive
thanks in advance
|
barneykarl
Member
Registered: 29th Jul 06
Location: Stevenage
User status: Offline
|
You say you have disconnected the 95 immobilizer is this a after market or vauxhall one.why did you use the 94 ecu you only had to change the engine.
|
Markus
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 19th Nov 07
Location: Beverley - East Yorkshire
User status: Offline
|
its a vauxhall immobiliser, i was out of ideas and the only things different was the immobiliser so i thought'd i may awsell try that
|
barneykarl
Member
Registered: 29th Jul 06
Location: Stevenage
User status: Offline
|
Put the original ecu back on how it was so it matches your transponder and chip in key, if it still does not start your problem is something else.
|
Markus
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 19th Nov 07
Location: Beverley - East Yorkshire
User status: Offline
|
Yea tried that before still didnt start thats why i changed it, i've changed every single plug and checked all leads ive had 3 mechanics look they cant see anything wrong either
|
barneykarl
Member
Registered: 29th Jul 06
Location: Stevenage
User status: Offline
|
any eml light on with the original ecu set up?
|
Markus
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 19th Nov 07
Location: Beverley - East Yorkshire
User status: Offline
|
ye just normal light on ignition does not flicker so not an ecu problem. gunna try another new rotar arm tomorrow as im getting spark from the king lead now
|