evans_corsab
Member
Registered: 23rd Sep 08
Location: Cheshire.
User status: Offline
|
torquing my head down today on my xe , got to the second stage , boom one of the bolts slips remove all the bolts and the head , check the thread hole and suprise all the threads have gone! so now its a case of helicoiling it and hoping it withstands that . anyone had the same experience?
|
Nic Barnes
Member
Registered: 5th Apr 04
Location: nowhere near ginger people
User status: Offline
|
have in other blocks in the past. renault 5 turbo block did it then the replacement snapped the bolt flush with the face.
|
Chadicles
Member
Registered: 8th Jun 09
Location: Westbury, Wiltshire
User status: Offline
|
I think my would of done this when i torqued down my xe head bolts if i never stopped when i did, so my heads not torqued down fully but i'm happy with it! what torque setting are you using? i was told 45nm and two lots of 90 and some1 else said 45nm and 3 lots of 60 off people on here but when i asked the local engine builder he told me 40nm and 3 lots of 90. i think i done 45nm and 1 lot of 90 and then a 60 on all head bolts as it was very tight and snatching even with copper grease on the bolts!
|
evans_corsab
Member
Registered: 23rd Sep 08
Location: Cheshire.
User status: Offline
|
i did 25nm and 2 lots of 90degrees , think its just getting torqued to ft (fukintight) next time my old 1.4 head got that and still runs perfect
|
philip2
Member
Registered: 1st Oct 06
Location: n.wales/chester
User status: Offline
|
1 set of bolts is 25nm + 3x60, otha is 25nm + 3x90.
Helicoil wil be more that fine.
|
mac1976
Member
Registered: 29th Dec 06
Location: tullibody , clackmannanshire
User status: Offline
|
used the wrong bolts by the sounds of things , there are 2 diff bolt lenghts
|
c20letandy1988
Member
Registered: 14th Apr 09
Location: Wirral, Merseyside drives: corsa turbo
User status: Offline
|
yeh theres the star torx male bolts for the later coilpack redtop and the female type star torx for the earlier redtop i dicovered this on doing mine
|
evans_corsab
Member
Registered: 23rd Sep 08
Location: Cheshire.
User status: Offline
|
Yeah im usin the earlier type bolts. They threaded down fine , its just with the block being so old i guess. Not to worry its getting helicoiled tomorow . Lets just hope theres no more hick ups after this!
|